http://ozreport.com/19.187#1

http://www.fai.org/civl-safety/hang-gliding/457-civl/civl-safety/37847-hg-safety-notices

http://www.icaro2000.com/Products/Hanggliders/Laminar/Vite centro xbar-En.pdf

Laminar and Laminar Z9 hang gliders This safety notice applies to
all topless hang gliders manufactured by Icaro 2000, from January 2012 to August
2015, in other words from registration numbers 9062 up until 9557, regardless of
the type of crossbar fitted. It could also apply to hang gliders which, in the
same period of time, have been subject to service or repair operations in which
one or both of the "crossbar centre bolts" was replaced. The problem regards the
central crossbar bolts, 90 mm in length, whose function is to hold the crossbar
bushes on the H-shaped central block.

After a report regarding a problem that occurred for the owner of a Laminar, it
has been found that some of the above-mentioned bolts may have not been made
according to the design drawings that we supplied to the manufacturer.
Unfortunately the problem is due to the fact that the supplier modified the
construction of the bolts independently and without our knowledge, without
incorporating the necessary quality control checks and without informing Icaro
2000. Icaro 2000 is intensely sorry for this problem and will do its utmost to
supply all pilots concerned with the new bolts.