https://www.facebook.com/lbunner/posts/10153365634852343

The Covert harness has nice zippered pockets for the barrel
release and the line. On the line side I slid a ring over the line, weak link
and attachment tab. The ring is attached to a bungee cord that is tied off deep
in the harness just above the knee level.

On the other end the bungee is tied to the ring under sufficient stretch/tension
that when off of tow, the bungee pulls the tab, weak link and release line into
the harness. The pics show:

1) the pro tow release hooked up,

2) the weak link attached to the tow tab and release line,

3) the bungee and ring over the tow tab (see above) and

4) the release line fed through the ring (note the small yellow line attached to
the ring and tow tab is used to retrieve the release line prior to flight as it
is usually buried deep in the harness),

5) the release line retracted.

It should be noted that the bungee and ring are not attached to the weak link or
release line in any manner.