Steve Kroop at Flytec <<info>>
writes:

Firmware v3.33 is available on our website (
http://flytec.com/Products/Software.htm ) now. However, v3.33c will be up in
a few days which address some recently found minor bugs. If you plan on
installing the new firmware you might want to wait for 3.33c. Below is a summary
of new features/functions/changes since 3.32:

1- Improved Competition Route: Allows non-standard and complex tasks (e.g.,
entry starts where the first TP is not the center of the start cylinder or even
where the TP is not within the start cylinder, entry-exit-entry turnpoints,
etc.)

2- Auto Zoom: Instrument will automatically switch to map page at full zoom (new
maximum zoom scale 0.1 km) when pilot is within a user-set distance to the
turnpoint cylinder/goal line. Feature now only becomes active 30 sec. Before the
start time and will remain active until finish line is crossed.

3-Nascent thermal tone: Pulse/pause ratio can be customized in Settings menu. It
is only active after Flight Acceptance and if groundspeed is greater than
10km/h. This eliminates noise after landing.

4- Cross track error: Back to the way it was (relative to the line between the
turnpoint centers of the current leg of the route). This allows pilots to once
again use XT Error to team fly (relate their relative positions).

5- Countdown timer eliminated from Information field: Time to start gate no
longer toggles with the name of the start cylinder (i.e., start cylinder name
shown all the time). This eliminates clutter/distraction in the information
Field. The time to start gate open can be seen in user-field Race Start.

6- Start gate open tone: When the start time has passed, a new alert is given
(three prolonged, high-pitched, two-tone beeps).

7- The three data fields on map page are now User-Fields

8- User-fields on map page can be a different set when map page is auto-zoomed.

9- On map page, press right arrow to remove Wps not used in the active
competition route. Now Wps will remain hidden until they are summoned back with
another press of the right arrow key.

10- SD card greater than 2GB can be used.